In offerta!

Must-Have Morel TiW 638Nd Woofer Medio-Bassi

Il prezzo originale era: 279,95 €.Il prezzo attuale è: 111,98 €.

Pagamenti sicuri Carta, PayPal e checkout protetto
Spedizione gratuita da 54,00 € Consegna rapida in tutta Italia
Supporto rapido Assistenza su ordini e spedizioni
COD: SK0008040 Categoria: Tag:

Descrizione

Descrizione del prodotto

Descrizione del prodotto Morel TiW 638Nd Woofer Medio-Bassi

For serious speaker builders that demand the world's best drivers, look no further than Morel's Titanium Advanced woofer series. The 6" TiW 638Nd features a 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response and a Uniflow chassis for reduced power compression.

Highlights

  • Open Uniflow aluminum diecast chassis for reduced reflections
  • Hybrid neodymium/ferrite magnet ferrite system
  • Titanium coil bobbin for low energy storage
  • 3" Hexatech aluminum voice coil
  • High 1,000W instantaneous power handling

Product details

Morel TiW 638Nd Titanium Series Hybrid 6" Woofer 8 Ohm

Since 1975, Morel has been on an ever-evolving quest to create the perfect, ultimate loudspeaker. This dedication is apparent in every product they produce: tweeters, midranges, woofers, and finished systems that serve the Hi-Fi, home theater, and car audio markets. Morel systems are today sold in more than 55 countries around the globe. Their products are made with exceptional care; each is assembled by hand and extensively tested, undergoing seven different quality assurance steps, to ensure only the highest standards are met.

Morel Titanium Advanced Series

The Titanium Advanced woofer series from Morel is the latest leap forward in woofer design. Huge 3" Hexatech aluminum voice coils (that use hexagonal shaped wire for high sensitivity and power handling) are wound onto titanium bobbins for amazingly low energy storage, resulting in lightning quick transients for superior attack and decay transients. Qms is also raised and allows for a wider range of enclosure options. Three magnetic systems are available: dual ferrite, Hybrid neodymium/ferrite, and Hybrid neodymium/ferrite with a Coppersleeve Neolin motor. Each is available in 4 and 8 ohm impedance.

Uniflow­ Aluminum Diecast Chassis

All of this wouldn't mean anything if the air swept by the driver got trapped in the motor or frame. Morel designed the Uniflow chassis to be as open and sonically transparent as possible. An over-sized vent on the pole piece, a frame-suspended spider, and exposed voice coil combine to virtually eliminate reflections and output-robbing power compression. The Uniflow chassis also allows for the use of an over-sized spider for complete control of the over-sized voice coil.

The 6" TiW 638Nd woofer features a Hybrid neodymium/ferrite magnet system, 8-ohm impedance, and a unique, one-piece DPC (Damped Polymer Composite) cone that offers flat frequency response from 40 Hz to 4,500 Hz on-axis, and from 40 Hz to 4,000 Hz off-axis. Its large voice coil allows it to handle 10 ms peak power transients of up to 1,000 watts when used correctly.

Show more

Mostra meno

Specifiche

Numero dell'articolo:

TiW 638Nd
EAN

0848864001975
Serie del woofer :Morel Titanium Former series
Tipo di woofer :Midwoofer
Diametro nominale :6"
Gestione della potenza (RMS) :150 Watts
Gestione della potenza (max) :1000 Watts
Impedenza (Z) :8 ohms
Sensibilità (SPL a 1m / 2,83V) :87 dB
Risposta in frequenza :40 to 4,500 Hz
Diametro della bobina mobile :3"
Resistenza DC (Re) :5.4 ohms
Induttanza della bobina mobile (Le) :0.53 mH
Frequenza di risonanza (Fs) :36 Hz
Fattore di merito meccanico (Qms) :3.4
Fattore di merito elettromagnetico (Qes) :0.39
Fattore di merito totale (Qts) :0.35
Massa del diaframma incl. la massa dell'aria (Mms) :17 gr
Cedevolezza meccanica della sospensione (Cms) :1.07 mm/N
Superficie del cono (Sd) :119 cm²
Prodotto BL (BL) :7.70 Tm
Volume equivalente di cedevolezza (Vas) :0.74 ft.³
Escursione lineare massima (Xmax) :5.25 mm
Materiale del cono / diaframma :Poly Composite
Materiale della sospensione :Rubber
Materiale del filo della bobina mobile :Aluminum
Supporto della bobina mobile :Titanium
Materiale del cestello / telaio :Cast Aluminum
Materiale del magnete :Neodymium
Diametro esterno complessivo :6.3"
Profondità complessiva :2.72"
Diametro del ritaglio del pannello frontale :5.51"
# Numero di fori di montaggio :6
Volume per cassa sigillata :0.17 ft.³
Frequenza di risonanza della cassa sigillata (F3) :82 Hz
Volume per cassa reflex :0.37 ft.³
Frequenza di risonanza della cassa reflex (F3) :48 Hz

Show more

Mostra meno