Descrizione
Related videosSpecifications Blackmagic GPI and Tally Interface allows you to use the tally function with ATEM switchers. Thanks to 8 contact closure outputs, it is possible to send a tally signal to cameras, replay devices and monitors, signaling to operators which camera is on air. If additional outputs are required just cascade a second GPI and Tally Interface, which will connect to the switcher via ethernet.
| Weight | 120 g |
| Dimensions | 9,6 x 9,0 x 2,3 cm |
| Input | 1 x Optical isolator triggered by a ground connection with a maximum of 5V at 14mA |
| Output | 1 x Mechanical relays with ground contact closure with a maximum of 5V at 14mA |
| Ethernet | 1 x BaseT 10/100 with loop output to interconnect other ethernet devices |
| Computer Interface | 1 x Hi-Speed USB 2.0 for configuration and firmware updates |
